How is it possible to turn water into fuel?Our HYDRO-4000 use a process known as electrolysis to produce Brown’s Gas as described below.Electrolysis of WaterElectrolysis of water can be achieved in a simple hands-on project, when electricity from a low-voltage DC power supply (e.g. 12 volt battery) is passed through a vessel of water. The reaction that occurs is: 2H2O(aq) = 2H2(g) + O2(g)In practice, some kind of electrolyte will need to be used. Electrolyte is a dilute mixture of minerals and water used to enhance the flow of electricity. In our HYDRO-4000 we use inexpensive distilled water. HYDRO-4000 Process Our HYDRO-4000 utilizes the electrolysis process, with certain patent-pending modifications built in, to improve its efficiency, durability and ease of operation. Gases are captured by the HYDRO-4000, mixed with a filtered air flow, then directed to the vehicle’s fuel intake where they are combined with the vehicle’s ordinary fuel/air mixture. The result is enhanced combustion, improved mileage and reduced greenhouse gas emissions. The reduction in emissions is caused when non-polluting hydrogen adds combustion energy, replacing some of the ordinary fuel needed to power the vehicle. How Electrolysis WorksElectrolysis works when an electric current is applied, through an electrolytic solution, between a cathode (negative pole) and an anode (positive pole). During electrolysis, hydrogen gas will be seen to bubble up at the cathode, and oxygen will bubble at the anode. The two gases combined in a free state, constitute what is called “Brown’s Gas” If, however, the wrong metal is utilized for the anode, oxygen will react with the anode instead of being released as a gas. For example, using iron electrodes in an electrolyte solution will produce iron oxide at the anode, which will react to form iron hydroxide. When producing large quantities of hydrogen, this can significantly contaminate the electrolytic cell reducing its hydrogen output. This is why our HYDRO-4000 is made entirely of stainless steel.

• 20%- 60% reduction in fuel consumption!
• Reduces Global Warming!
• Improves power and performance of your vehicle!
• Zero pollutants!
• Distilled water fill-up is all that’s needed to produce hydrogen!
• No Hydrogen stored under pressure, makes for safe systems!
• Increases the life of your engine!
• Cutting edge technology!
• Very affordable!
• Patent Pending!